4x Complete Innovative Silver Anodized Savage Shocks

£120.00

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 0 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
     
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CY Flywheel / Fan Cover1 x Losi DBXL front & rear shock end ball1 x HPI Baja Rear Brace RED 4mm - 874881 x 50x 3.5mm Body Clip Bulk - Rpin1 x Spur Gear Spacer - 866161 x IRC Hing Pins Front Top V2 - 866331 x Baja Front lower arm brace Red - 874811 x MT4 Chassi Gaskets - 6x1 x IRC ESC Box - MT41 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Spur Gear Spacer RED - 866161 x Blue Big Bore shock Spring Retainers - Aluminium1 x CY Pull Start Assembly - Metal grab1 x Servo Y Lead JR, Futaba, Hitec etc1 x IRC RX Box Set - MT41 x M3x8 Countersunk cap screws - bag 101 x Front Axel - Thunder Tiger MT4 CVD Universal1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x LipoBox - 4S1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Baja Front Upper Brace - 874811 x Shock Tower Brace - Black1 x Left Spacer RED- 875711 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x Left Spacer Black - 875711 x Battery box bracket HPI Rush box1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x M8x20 Socket head cap screws - bag 61 x HPI BAja Left Side Engine Mount Brace RED - 874891 x M3x35 Socket head cap screws - bag 101 x Innovaitve-RC Shock Piston1 x Right Clutch Spacer - 875551 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Battery box bracket HPI Rush box - Savage X1 x NGK Spark Plug CMR5H1 x Innovative-RC Carbon Fiber replacement Pads1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x M3x10 Button Head Socket cap screws - bag 101 x HPI Baja Shorty Servo Mount Brace1 x M2 Captive Nuts / T Nuts - Bag 101 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x 23cc (32mm) Cylinder Head - 4 Bolt1 x High Response Clutch Spring - Red1 x M4x12 Countersunk Socket head cap screws - bag 101 x M6 Captive Nuts / T Nuts - Bag101 x M3x20 Socket Cap Screws - Bag of 101 x 4-40x3/8 Button Head socket Screw - Bag 101 x MCD Fork Ends set 4 - 8mm1 x 27cc (35mm) Cylinder Head 4 Bolt1 x 23cc (32mm) Cylinder Head - 2 Bolt1 x 8x Shock Standoffs - Buggy Shocks1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x 2x Flanged Rubber Shield 10x6x3mm1 x CRT Tower Set - Silver1 x X Arm shock mounts - 4x1 x 4x Hong nor CRT Shock standoffs1 x M6 Hank rivet bush - Bag101 x Losi Steel King Pins B20741 x Baja Rear Lower Brace 2 - 874791 x Brake plate spacer Blue - 874971 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x Maxima Air Filter Cleaner - Spray1 x NGK Spark Plug CMR7H1 x CY 27cc Piston ring - 35x1mm1 x Black Anodized Roll Bar1 x 90Deg PushFit 4mm tube M51 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x I-RC stearing Linkages1 x 6x Differential Gaskets - TT1 x Skid plate for Standard LCG TVPs
Reviews
Black Anodized Roll Bar
Black Anodized Roll Bar
£12.99

Super strong, yet suprisingly light at the same time... Fitt...