Thunder Tiger Differential Case MT4 G3 - Red

£8.99

Product may vary slightly from image representation.
  • Model:TT-PD1897
Live Stock Check: 0 units
Share This Product

Silver  Aluminium Diff Cup for the Thunder Tiger RC ModelsV2
NOTE
Cross Pin set (3.5mm pins) are required or stock pins need to be chamfered to fit the Alli cups over the stock plastic version, this can be done with a dremel or file , alternative Innovative-RC make diff pins to pre fit these cups - Ask us for more information if needed.
This is due to use closing up the cross pin length to give a better seal face onto the diff cup around the gaskets due to user feedback.


This cup is a direct replacement for the Front, Rear & Center differential over the stock plastic cups.

These cups are made from high grade 6082-T6 aluminium and clear anodized for a hard wearing long life surface. 

Fites Models:
ER-1, EB-4 S3, ST-1 Pro, EB-4 S3 Rall Game, EB-4 S3 Pro racing kit, EB-4 G3 Brushless Bugger & MT4 G3 4wd Monster Truck. May fit other models also in TT range.
 

Each Cup Includes:-
1x Diff Cup case.
1x Diff Gasket.
2x Hardened Gear Pins.
4x Countersunk socket cap Screws.
2x Diff Cup O-Rings

Required Parts:-
DIff Gears , Oil & Bearing.

Please Note,
Each Cup may need shimming different to each gear set and not all shims may be needed from the gear sets. Good idea to check mesh and setup before filling with oil.
Cross Pin set (3.5mm pins) may need chamfer adding to fit the Alli cups over the plastic version, this can be done with a dremel or file , alternative Innovative-RC make diff pins to pre fit these cups - Ask us for more information if needed.

Loctite all screws into the cup so they do not back out.. Blue Loctite recomended.

These cups may also fit other trucks, please contact us if you unsure.
Cup dimensions.
8mm bearing shaft, 25mm Long overall.

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Baja Diff Oring Seal1 x 2x Flanged 10x6x3mm1 x Clutch Spring - Yellow1 x Big Bore Shock 5 Hole Piston1 x HPI Savage Screw kit (all models) - High tensile1 x Innovative-RC TT MT4 trayless Kit - Blue1 x M3 washers - Zinc plated bag 201 x Savage Rod End 10mm Balls1 x Shock O-Ring Kit1 x M4x12 Socket head cap screws - bag 101 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x Center Tower throttle supports1 x M3 Nylock nut bag of 201 x Baja Bush Set1 x M3x10 Countersunk Socket head cap screws - bag 101 x HPI Baja wheel drive pin 5x24- 965041 x M4 Washer Zinc plated bag 201 x Crank Case Engine Snap Ring1 x M3 Captive Nuts / T Nuts - Bag101 x HPI Firestorm battery box1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x 3x Thunder Tiger Differential Case MT4 G3 Silver1 x HPI BAja Left Side Engine Mount Brace - 874891 x 29cc Piston Rebuild Kit Set (36mm)1 x Center Tower to Clutch suport brace V2.01 x Center Tower top plate for truck V1.01 x Front Big Bore Shocks - Losi 5ive Red1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x IRC Front MID Front big bore springs - Losi 5T1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x Flux Black Anodized Standard LCG TVP Kit1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x HPI Baja Shorty Servo Mount Brace1 x 3x6x0.3 Steel Shim - Pack 101 x Innovative-RC Muggy Chassis - Black1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x 4mm Shock Rod Ends1 x 4x Savage Steering post bearings - 6x10x3mm1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x NGK Spark Plug CMR5H1 x Center Tower to Clutch suport brace V1.01 x IRC Red UHD rear big bore springs - Losi 5T1 x Big Bore Shock Blank Piston1 x Big Bore shock Spring Retainers - Aluminium1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x M4x10 Button Head Socket cap screws - bag 101 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Baja Rear Lower Brace 2 - 874791 x M3x25mm Socket Cap Screw - BAG 101 x Center Tower bearing set1 x Black Big Bore shock Spring Retainers - Aluminium1 x Battery box bracket HPI Firestorm1 x Full X upgrade Kit1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x Black Anodized Roll Bar1 x 2x 9x20x6mm Ball Bearing Rubber Shield
Reviews
High response clutch set - Red Spring
High response clutch set - Red Spring
£17.99

<p>great quality for price need to keep these in stock</p>...