4x Complete Innovative Black Anodized Savage Shocks

£120.00

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x HPI Baja stearing servo adapter mount - Blue1 x Big Bore Shock Body All Colours - Losi Front1 x Innovative-RC TT MT4 trayless Kit - Blue1 x M3x10 Countersunk Socket head cap screws - bag 101 x M4 Washer Zinc plated bag 201 x MCD Fork Ends set 4 - 8mm1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x CY 26cc Piston ring - 34x0.7mm1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x Innovative-RC Carbon Fiber replacement Pads1 x V2 Savage + MCD Heavy Duty Baja Shock Shaft - 8mm1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x CY Engine FlyWheel (Rotor)1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x NGK Spark Plug CMR5H1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x 3x Thunder Tiger Differential Case MT4 G3 Silver1 x Front Big Bore Shocks - Losi 5ive Red1 x IRC Red UHD rear big bore springs1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x HPI Baja Shorty Servo Mount Brace1 x CY 23cc Piston Ring - 32x1mm1 x Savage Rod End 10mm Balls1 x M3 Nylock nut bag of 201 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x M6 Rod Ends - Right hand thread1 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x Engine Clutch bottom spacer 6.5mm - 875711 x HPI BAja Left Side Engine Mount Brace - 874891 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x 4x Savage Steering post bearings - 6x10x3mm1 x Center Tower to Clutch suport brace V1.01 x HPI Baja stearing servo adapter mount - Black1 x Thunder Tiger MT4 CVD Universal rebuild1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x Brake pad screws - IRC Center Tower to IRC Pads1 x M3x12 Socket head cap screws - bag 101 x 4x Hong nor CRT Shock standoffs1 x Battery box bracket HPI Firestorm - Savage X1 x Baja Rear Lower Brace 2 - 874791 x Big Bore Shock Blank Piston1 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x M4x10 Button Head Socket cap screws - bag 101 x Blue Anodized Shock Cap1 x Full X upgrade Kit1 x 2x Flanged Rubber Shield 10x6x3mm1 x ProLux Stone Fuel Filter - RED1 x Silkolene - Foam Filter Oil 1L1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x M3x8 Socket head cap screws - bag 101 x Baja Upper Front Arm Brace Upper Blue1 x Maxima Air Filter Cleaner - Spray1 x Center Tower bearing set1 x Losi Steel King Pins B20741 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Shock Hardware - screws, nuts etc1 x M4x30 Countersunk Socket head cap screws - bag 101 x M3x10 Socket head cap screws - bag 101 x 23cc (32mm) Cylinder Head - 2 Bolt1 x Brake plate spacer Blue - 874971 x Baja Diff gear holders1 x Black Anodized Roll Bar
Reviews
Diff/Bulkhead Housing - Rear Silver B2542
Diff/Bulkhead Housing - Rear Silver B2542
£170.00

<p>Hi, I&#39;m leaving this review as I had purchased a chin...