Flux Black Anodized Standard LCG TVP Kit

53.13€

Product may vary slightly from image representation.
  • Model:Flux-STDkit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - based on standard HPI Flux Length TVPs but 4mm Thick.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: Standard Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
Based on standard flux tvp length so no body shell changes needed a direct 100% replacement
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):260grams
Skid Plate & Braces: 90 grams

.:Included:.
2x TVPs (Left & Right)
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbones 121mm1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x IRC Red UHD Front big bore springs - Losi 5T1 x Big Bore Shock Body All Colours - Losi Front1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x IRC Front MID Front big bore springs - Losi 5T1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Baja Shock Spring Retainer - LST1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CY 4 Bolt Gasket set rebuild kit1 x Baja Brake Kit - Full Set all Models1 x Brake pad screws - M4 Tower to IRC pads1 x CVD inner Drive set Pins 5x20mm1 x CY Clutch case Housing1 x CY Flywheel / Fan Cover1 x 10x16x0.1 Steel Shim - Pack 101 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x Front - Antiroll Bar brace1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Baja Bush Set - BLUE1 x 29cc Piston (36mm)1 x MT4 Chassi Gaskets - 6x1 x Carburetor Gasket1 x Innovative-RC Hoodie - Size Large1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x M6 washers - Zinc plated bag 201 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x HPI Baja Rear Brace RED 4mm - 874881 x Engine Clutch bottom spacer stock - 875711 x 50x 3.5mm Body Clip Bulk - Rpin1 x Innovative-RC Hoodie - Size XXX Large1 x 5x 2.5x14mm CVD Dowel Pins1 x CVD Pin rebuild kit - B32171 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Baja Shock Top Mounts - Front1 x Innovative-RC T-Shirt - Size Medium1 x Thunder Tiger Front/Rear outdrive1 x IRC ESC Box - MT41 x Baja Upper Front Arm Brace Upper Red1 x Spur Gear Spacer - 866161 x Losi 5ive Engine mount inserts - #181 x Losi 5ive-T 2.0 servo single arm V2.01 x IRC Hing Pins Front Top V2 - 866331 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x Outdrive cup shaft Orings1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Flywheel Key1 x Losi 5T 5B Shock Towers V2 - Rear1 x I-RC Losi Big Bore rear shock Spring - 44lb1 x 4x Complete Innovative Black Anodized Savage Shocks1 x CY 29cc Piston ring - 36x1mm1 x Rear Big Bore Shocks - Losi 5ive Blue1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Thunder Tiger Differential Case MT4 G3 - Red1 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x I-RC Baja Big Bore rear shock Spring - Stock1 x CY stock crank set1 x M4x16 Socket head cap screws - bag 101 x I-RC Losi Big Bore front shock Spring - 44lb1 x 4mm Nylon brake pipe1 x IRC RX Box Set - MT41 x Shock Cap O-Ring Spacers1 x Carburetor Set WT668
Reviews
Engine Clutch bottom spacer 6.5mm - 87571
Engine Clutch bottom spacer 6.5mm - 87571
2.95€

<p>i asked Innovative RC if they could make a engine clutch ...