Innovative-RC HPI Baja 5B 5T enclosed chassis - BLUE

$160.47

Product may vary slightly from image representation.
  • Model:87477-BL
Available Options
Live Stock Check: 0 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Pre installed Reivets for under chassis brace

 

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 1x Savage Diff Cup Case1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x Baja Shock Top Mounts - Front1 x Baja Shock Spring Retainer - LST1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x 4x Complete Innovative Black Anodized Savage Shocks1 x Innovative-RC Hoodie - Size Large1 x Innovative-RC Hoodie - Size XXX Large1 x 5x 2.5x14mm CVD Dowel Pins1 x 10x 3.5mm Body Clip - Rpin1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Shock Bleed Screw - 4x1 x Shock Cap O-Ring Spacers1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x M4x30 Socket head cap screws - bag 101 x Clutch Shoe Holder Mount1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Front Heavy Duty losi Shock Shaft - 8mm1 x 6x Differential Gaskets1 x CVD inner Drive set Pins 5x22mm1 x Clear Anodized Shock Cap1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Rear Big Bore Shocks - Losi 5ive Red1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Air Filter Gasket1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x Savage Rod End 10mm Balls1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x IRC Red UHD Front big bore springs - Losi 5T1 x HPI Firestorm battery box1 x Big Bore Shock Body All Colours - Losi Front1 x M3 washers - Zinc plated bag 201 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 2x Savage Diff Cup Case1 x Losi 5ive drive cup Clips1 x Black Adjuster Ring1 x HPI Baja Shorty Servo Mount Brace1 x High response clutch set - Red Spring1 x M4x4 Grub Screws1 x 8x Shock Standoffs - Buggy Shocks1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x 2x Top shock support brackets - Savage x1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x IRC Red UHD rear big bore springs - Losi 5T1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x HPI Baja Rear Lower Brace - 874801 x 4x Complete Innovative Silver Anodized Savage Shocks1 x X Upgrade Kit1 x HPI Baja Right Side Engine Mount Brace - 874901 x CVD Drive set Pins 4x20mm B65601 x Red Big Bore shock Spring Retainers - Aluminium1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x I-RC Baja Big Bore rear shock Spring - Stock1 x Engine / Cylinder Cover 4 Bolt1 x Baja Bush Set - BLUE1 x CVD inner Drive set Pins 5x20mm1 x CY Clutch case Housing1 x Flywheel Key1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Carburetor Gasket1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x Roll Bar for HPI Savage 3mm1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x CY stock crank set1 x Losi Titanium Grade 5 King Pins B20741 x Diff/Bulkhead Housing Screw Set1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x Rear Big Bore Shocks - Losi 5ive Silver1 x Rear Big Bore Shocks - Losi 5ive Blue1 x HPI Baja Rear Brace 4mm - 874881 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x IRC Hing Pins Rear Hub V2 - 866361 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x Losi 5T 5B Shock Towers V2 - Rear1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x M4 Captive Nuts / T Nuts - Bag101 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x 4 Bolt Cylinder Gasket1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x CY Pull Start Assembly1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x 27cc (35mm) Cylinder Head 2 Bolt1 x MCD Fork Ends set 4 - 8mm1 x Futaba type sliding charing switch1 x Savage Big Bore shock Socks - Black1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x Innovative-RC Foam Filter Oil - 100ml1 x Ceter tower diff mounts Front & Rear1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Losi 5ive Hing Pins A-Arms1 x Front Big Bore Shocks - Losi 5ive Black1 x Rear Big Bore Shocks - Losi 5ive Black1 x M5x5 Grub Set Screw1 x Front Big Bore Shocks - Losi 5ive Blue1 x M6 Rod Ends - Left hand thread1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x Center Tower top plate for truck V2.01 x M3x5 Button Head Socket cap screws - bag 101 x IRC Black HD Rear Big Bore Springs1 x M3 Nylock nut bag of 201 x HPI Baja Brake Calliper1 x HPI Baja Brake Calliper - Blue Anodized1 x Shock O-Ring Kit1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Innovative-RC Muggy Chassis - Black1 x Big Bore shock Spring Retainers - Aluminium1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x M5 Captive Nuts / T Nuts - Bag101 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x M4 Washer Zinc plated bag 201 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Innovative-RC Big Bore Shock Socks - Black1 x HPI Baja stearing servo adapter mount1 x Big Bore Shock 5 Hole Piston1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Center Tower bearing set1 x IRC Hing Pins Full Set V2 - 10Pins1 x M3 Captive Nuts / T Nuts - Bag101 x M6 Rod Ends - Right hand thread1 x TurtleRacing Rear shock mounts1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x CY 26cc Piston ring - 34x0.7mm1 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x Big Bore shock Spanner1 x Rear Shock end Ball - 11mm1 x Losi 5ive Spring Retainers1 x Shock Hardware - screws, nuts etc
Reviews
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
$73.55

really nice well made chassis plate , looks nice with all my...