4x Complete Innovative Black Anodized Savage Shocks

141.69€

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x 10x16x0.1 Steel Shim - Pack 101 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x Rear Heavy Duty losi Shock Shaft - 8mm2 x HPI Baja Shorty Servo Mount Brace1 x HPI Baja Rear Brace RED 4mm - 874882 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x 29cc Piston (36mm)1 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x 50x 3.5mm Body Clip Bulk - Rpin2 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile2 x I-RC Losi Big Bore rear shock Spring - 44lb2 x Baja Bush Set - BLUE2 x Rear Big Bore Shocks - Losi 5ive Blue2 x Innovative-RC Hoodie - Size XXX Large2 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks2 x Carburetor Gasket2 x Losi 5ive-T 2.0 servo single arm V2.02 x 24mm Wheel Nuts - GRP & MCD Wheels2 x Losi 5ive Hing Pins A-Arms2 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x UHD Innovative-RC BAJA dogbones Standard- 1049662 x IRC ESC Box - MT42 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended2 x Innovative-RC HPI Baja under chassis brace V2 - Silver2 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0302 x MT4 Chassi Gaskets - 6x2 x Innovative-RC Hoodie - Size Large2 x HPI Baja Rear Lower Brace Blue - 874802 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V22 x Diff/Bulkhead Housing Screw Set2 x 1x Savage Diff Cup Case2 x Outdrive cup shaft Orings2 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x Baja Upper Front Arm Brace Upper Red2 x I-RC Losi Big Bore front shock Spring - 44lb2 x CVD Pin rebuild kit - B32172 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x Flywheel Key1 x M6 washers - Zinc plated bag 202 x Engine / Cylinder Cover2 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm2 x Innovative-RC T-Shirt - Size Medium2 x Servo Y Lead JR, Futaba, Hitec etc1 x Baja Front Upper Brace Blue - 874812 x IRC Red UHD Front big bore springs2 x CY stock crank set2 x Blue Big Bore shock Spring Retainers - Aluminium2 x 27cc (35mm) Cylinder Head 2 Bolt1 x IRC Hing Pins Front Top V2 - 866332 x Innovative-RC T-Shirt - Size Large1 x losi 5ive diff inserts1 x 26cc piston (34mm)1 x CY 29cc Piston ring - 36x1mm1 x Losi Titanium Grade 5 King Pins B20741 x Losi 5T 5B Shock Towers V2 - Rear1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Thunder Tiger Differential Case MT4 G3 - Red1 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x Losi 5ive Engine mount inserts - #201 x Shock Bush short1 x Engine Clutch bottom spacer Black - 875711 x CY Pull Start Assembly - Metal grab2 x IRC Front MID Front big bore springs - Losi 5T1 x Losi DBXL front & rear shock end ball2 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x CVD inner Drive set Pins 5x20mm1 x CY 4 Bolt Gasket set rebuild kit
Reviews
Diff/Bulkhead Housing - Rear Silver B2542
Diff/Bulkhead Housing - Rear Silver B2542
200.73€

<p>Hi, I&#39;m leaving this review as I had purchased a chin...