Flux Standard LCG TVP Kit

£45.00

Product may vary slightly from image representation.
  • Model:Flux-STDkit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - based on standard HPI Flux Length TVPs but 4mm Thick.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: Standard Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
Based on standard flux tvp length so no body shell changes needed a direct 100% replacement
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):260grams
Skid Plate & Braces: 90 grams

.:Included:.
2x TVPs (Left & Right)
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

had these a while now and have done some proper hard bashing and everything on my savage has broke twisted or bent but these are like new very strong easy to fit. i liked them so much i went for the xl upgrade and added 23mm wheels and just as solid very good upgrade dont read about them buy em and see for yourself

Rated by darren mccarthy
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Baja Brake Kit - Full Set all Models1 x CVD inner Drive set Pins 5x20mm1 x 1x Savage Diff Cup Case1 x HPI Baja Rear Lower Brace Blue - 874801 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x Losi 5ive-T 2.0 servo single arm V2.01 x 5x 2.5x14mm CVD Dowel Pins1 x HPI Baja Rear Brace RED 4mm - 874881 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Rear Big Bore Shocks - Losi 5ive Blue1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Flywheel Key1 x 10x 3.5mm Body Clip - Rpin1 x HPI BAja Left Side Engine Mount Brace RED - 874891 x Diff/Bulkhead Housing - Rear Silver B25421 x differential cross pins TT MT4 - 6x1 x IRC Red UHD Front big bore springs - Losi 5T1 x M4x4 Grub Screws1 x M8 Rod Ends for Big Bore Shocks1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x Baja Upper Front Arm Brace Upper Blue1 x I-RC Baja Big Bore front shock Spring - Stock1 x Baja Rear Lower Brace 2 - 874791 x Crank Case Sealed bearing 12x28x8- 60012RS1 x HPI Baja wheel drive pin - 965041 x Thunder Tiger centre diff out drive2 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x DBXL Top shock cap Bush 5mm1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x 26cc piston (34mm)1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x Ofna 250cc Fuel Tank Mounts1 x Rear Big Bore Shocks - Losi 5ive Black1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x M3x35 Socket head cap screws - bag 101 x Front Big Bore Shocks - Losi 5ive Black1 x Baja Diff o-rings - bag101 x M6 Rod Ends & Steering ball set1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Losi 5ive Diff Gaskets - 6x1 x Shock Bush short1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x MCD Fork Ends set 4 - 8mm1 x Air Filter Gasket1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x HPI Baja Brake Calliper1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x Engine Clutch bottom spacer RED - 875711 x Innovative-RC Muggy radio tray set - Black1 x CY 23cc Piston Ring - 32x1mm1 x Savage Shock Bottom End Cap1 x I-RC Flywheel Puller tool1 x Clear Anodized Shock Cap1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x M3x12 Countersunk Socket head cap screws - bag 101 x M3x5 Button Head Socket cap screws - bag 101 x Shock Tower Brace - Black1 x Shock Bottom End Cap1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x M8x25 Socket head cap screws - bag 61 x Big Bore Shock Body All Colours - Losi Front1 x Brake pad screws - IRC Center Tower to stock Pads1 x M2 Captive Nuts / T Nuts - Bag 101 x M4x10 Socket head cap screws - bag 101 x Center Tower throttle supports1 x 3x Losi 8ight-T Diff Cup - Black1 x 1x Losi Muggy Diff Cup - Silver1 x M3 Nylock nut bag of 201 x HPI Savage Screw kit (all models) - High tensile1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x M8x20 Socket head cap screws - bag 61 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x M4x12 Socket head cap screws - bag 101 x HPI Firestorm battery box1 x 29cc Piston Rebuild Kit Set (36mm)1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x HPI Baja Shorty Servo Mount Brace1 x Rear Chassis Plate 7075-T6 V3 87482 - Blue1 x V2 Savage + MCD Heavy Duty Baja Shock Shaft - 8mm1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x M5 Captive Nuts / T Nuts - Bag101 x M5 Hank rivet bush - Bag101 x NGK Spark Plug CMR5H1 x HPI MT2 Diff Cup Case Silver - 1x1 x M6 Rod Ends - Right hand thread1 x Baja Shock Spring Retainer - Slotted1 x 4-40x3/8 Button Head socket Screw - Bag 101 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x IRC Hing Pin screw & washer set1 x NGK Spark Plug CMR7H1 x 3x Losi Muggy Diff Cup - Silver1 x Black Anodized Shock Cap1 x M6 Rod Ends & camber ball set1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Losi 5ive Front and rear shock end ball1 x Big Bore shock Spring Retainers - Aluminium1 x Maxima Air Filter Cleaner - Spray1 x X Upgrade Kit1 x Brake plate spacer Blue - 874971 x 10x 6mm Body Clip - Rpin1 x 90Deg PushFit 4mm tube M51 x HPI MT2 Diff Cup Case Black - 1x1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x CVD Drive set Pins 4x20mm B65601 x insulator gasket1 x M4x4 Grub/Set Screw1 x 4x Complete Innovative Silver Anodized Savage Shocks1 x Losi 5ive Spring Retainers1 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x 1x Losi LST1 & LST2 Diff Cup - Black1 x HPI Baja Right Side Engine Mount Brace RED - 874901 x MCD tower mounts for MCD BB shocks
Reviews
Engine Clutch bottom spacer 6.5mm - 87571
Engine Clutch bottom spacer 6.5mm - 87571
£2.50

<p>i asked Innovative RC if they could make a engine clutch ...