Extended 6mm Race TVP Kit

73.21€

Product may vary slightly from image representation.
  • Model:ext6-race
Live Stock Check: 0 units
Share This Product

 

The ideal upgrade for any serious racer who is all ways looking for the best possible performance.
Allays trying to save them extra few seconds from a race lap or fed up of getting beaten by that split second now is your chance to save some critical weight and earn back them few vital seconds.

These TVPs are specially design with racing in mind where lightens is a key aspect while also maintaining the utmost critical strength within the design.

These TVPs are extended 6mm length and use the standard rear dog bone from the HPI Savage. TVPS are made from 6082-T6 2.5mm thick.
TVPs are full Mid tank ready with pre-drilled holes for fixing of servos and tank, Full mid tank kit (see our midtank kit page)

Weight comparison table :-

 

TVP Weight - TVPs Weight - Complete
2.5mm Innovative-RC EXT6 Race TVPs 5.7oz (160g) 10.6oz (302g)
4mm Innovative-RC bash TVPs 9.7oz (275g) 14.5oz (412g)
standard non LCG HPI 5.8oz (165g) ------
5mm LCG HPI TVP (SavageX) 5.4oz (152g) ------

Note: Weight- TVPs= weight of left & right TVP only, Weight complete= weight of TVP,Skid plate,engineplate & screws.
- weights above should be used as a guide line only.

Included Items :-
1x Front extended 6mm LCG Race TVPs.
1x LCG Engine plate.
1x Extended 6mm length skid plate.
1x TVP screw kit - Hardend grade 12.9 socket cap screws.

Detailed specification of parts:-
TVPs :-
These TVPs are lowered on the Engine and Gearbox giving the savage a more stable and lower ride height. These are made from 2.5mm thick 6082-T6 Aluminum.

12mm lowered on Engine & Gearbox.
Extra clearance for bigger flywheels.
Countersunk the two screw holes hidden by roll bar due to lowering, so no drilling or modding roll bar or TVPs after buying them also allows for mounting of any standard roll bar.

LCG Engine Plate for HPI Savage:-
This engine plate is designed to fit the LCG TVPs and is a must have item.
Made from one peace of 6082-T6 aluminum giving more strength than the standard Engine plate. This Engine plate also contains the needed cut-out for clearing the drive shaft and drive cup due to the lowering of the Engine and gearbox.
3mm Thick Engine plate (Overall with cross brace 9mm).
Cut outs to clear dog bone and drive cup.

Skid plate Specs :-
Skid Plate to fit to the LCG Race extended 6mm TVPs.
Made from durable 2mm thick 6082-T6 aluminum.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.

Roto Start:-
Please note, Roto unit will work with HPI quick access bulkheads found on savage X with no mods, when using standard hpi bulkheads please note ofna roto unit will need to be used or modding of the bulk head unit. after market bulks eg GPM work fine with out the cross brace and allow stock roto to be used.

Note: 6082-T6 gives upto 18% more strength than conventional 6061-T6

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Big Bore Shock Body All Colours - Losi Front2 x HPI Baja Shorty Servo Mount Brace2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x IRC Front MID Front big bore springs - Losi 5T1 x CY Flywheel / Fan Cover1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Innovative-RC Hoodie - Size XXXX Large1 x Losi DBXL front & rear shock end ball1 x Baja Brake Kit - Full Set all Models1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x CVD inner Drive set Pins 5x20mm1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CY 4 Bolt Gasket set rebuild kit1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x CY Clutch case Housing1 x Brake pad screws - M4 Tower to IRC pads1 x Baja Front lower arm brace Red - 874811 x Carburetor Gasket1 x IRC ESC Box - MT41 x Innovative-RC Hoodie - Size Large1 x Baja Front Upper Brace Blue - 874811 x IRC Red UHD Front big bore springs1 x Innovative-RC T-Shirt - Size Medium1 x Losi 5ive Engine mount inserts - #201 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Baja Shock Top Mounts - Front1 x Diff/Bulkhead Housing - Rear Silver B25421 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x IRC Hing Pins Rear Hub V2 - 866361 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Thunder Tiger Front/Rear outdrive1 x Shock Bleed Screw - 4x1 x IRC RX Box Set - MT41 x Engine Clutch bottom spacer Black - 875711 x Losi 5ive Engine mount inserts - #181 x I-RC Losi Big Bore front shock Spring - 44lb1 x CY Replacement Crank Case Gasket1 x M3x8 Countersunk cap screws - bag 101 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x ProLux Light Weight rebuildable fuel filter - large1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x Losi 5ive top shock mounts1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x Front Heavy Duty losi Shock Shaft - 8mm1 x Shock Bush short1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874902 x 10x16x0.1 Steel Shim - Pack 101 x Brake plate spacer RED - 874971 x M6 Rod Ends & camber + steering ball set1 x Rear Big Bore Shocks - Losi 5ive Red1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x Shock Tower Brace - Black2 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Baja Front Upper Brace - 874812 x I-RC Baja Big Bore rear shock Spring - Stock1 x Front Big Bore Shocks - Losi 5ive Silver1 x Innovaitve-RC Shock Piston1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x 4 Bolt Cylinder Gasket1 x Short Big Bore Rod Ends - M82 x Right Clutch Spacer - 875552 x Left Spacer - 875712 x HPI BAja Left Side Engine Mount Brace RED - 874892 x V3 Rear Big Bore Shocks - Baja 5B 5T2 x CY Kill Switch Inc rubber cover2 x Crankcase engine Seal set - Nitrile type2 x M3x3 Grub Set screw2 x Flywheel Nut2 x M4x16 Countersunk Socket head cap screws - bag 102 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874892 x Piston Pin 23 & 26cc - 8x25mm2 x Battery box bracket HPI Rush box2 x O-Ring Diff Cups - 9.5mmx2.5mm2 x CVD inner Drive set Pins 5x22mm2 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3212 x M3x16 Countersunk Socket head cap screws - bag 102 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm2 x Innovative-RC TT MT4 trayless Kit - RED2 x Losi 5T 5B Shock Towers Bash - Rear SILVER2 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 82 x CY 2 Bolt Gasket set rebuild kit2 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY2 x Rear Big Bore Shocks - Losi 5ive Black2 x Heavy Duty On/Off Switch & charging jack Futaba Type2 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite2 x Center Tower top plate for truck V1.02 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H2 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x2 x Innovative-RC Muggy Chassis - Silver2 x Dgobone Drive Pin Set 5x24mm2 x M8x20 Socket head cap screws - bag 62 x Roll Bar for HPI Savage 3mm2 x Ceter tower diff mounts Front & Rear2 x 3x Losi 8ight-T Diff Cup - Silver2 x M5x5 Grub Set Screw2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black2 x Innovative-RC Foam Filter Oil - 100ml2 x LipoBox - 4S2 x IRC Hing Pins Rear Top V2 - 866352 x Titanium Exhaust Wrap2 x Piston Pin 27 & 29cc - 8x282 x innovative-rc Losi 5ive Diff Cup / Case2 x Losi 5T 5B Shock Towers Bash - Front SILVER2 x Crankcase engine Seal set - Viton type2 x HPI Baja wheel drive pin 5x24- 965042 x Front Big Bore Shocks - Losi 5ive Black2 x Ofna 250cc Fuel Tank Mounts2 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws2 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x Baja Diff bush - B0802 x 1x Losi LST1 & LST2 Diff Cup- silver2 x Baja Diff Cup side screws2 x differential cross pins TT MT4 - 6x2 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts2 x Engine / Cylinder Cover 4 Bolt2 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt2 x 6x Differential Gaskets2 x M3x35 Socket head cap screws - bag 102 x Big Bore Shock 3 Hole Piston2 x 3x Losi Muggy Diff Cup - Black2 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec2 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x Innovative-RC Carbon Fiber replacement Pads2 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0942 x CY Pull Start Assembly2 x 50x 6mm Body Clip Bulk - Rpin2 x LipoBox - 6S2 x Front Heavy Duty Baja Shock Shaft V2 - 8mm2 x CY Insulator manifold2 x Big Bore Shock 5 Hole Piston2 x IRC BLACK MID rear big bore springs - Losi 5T2 x M3 Captive Nuts / T Nuts - Bag102 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874872 x LCG TVPs, Exstended 1inch back with 6mm Front2 x Shock Tower Brace - Silver2 x Baja Rear lower arm brace Red - 874802 x I-RC Flywheel Puller tool2 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black2 x Battery box bracket HPI Rush box - Savage X2 x Innovative-RC HPI Baja under chassis brace V2 - Blue2 x CY 26cc Piston ring - 34x0.7mm2 x Losi 5ive drive cup Clips2 x M4 Nylock nut bag of 201 x Savage Shock Bottom End Cap2 x Baja Diff o-rings - bag102 x Losi 5T 5B Shock Towers - Front2 x Front Plated Heavy Duty Baja Shock Shaft - 8mm2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard2 x Innovative-RC Hong Nor CRT Chassis - Silver2 x Center Tower to Clutch suport brace V1.02 x Front Big Bore Shocks - Losi 5ive Blue2 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty2 x Losi 5ive Engine mount inserts - #192 x HPI Baja Brake Calliper2 x DBXL Top shock cap Bush 5mm2 x Diff/Bulkhead Housing - Front Silver2 x 23cc (32mm) Cylinder Head - 4 Bolt1 x Left Spacer Black - 875711 x Brake pad screws - IRC Center Tower to IRC Pads2 x Crank Case Engine Snap Ring1 x Innovative-RC Hoodie - Size Small2 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0302 x Engine Clutch bottom spacer RED - 875711 x 26cc (34mm) Cylinder Head - 4 Bolt2 x 8x Shock Standoffs - Standard Shocks1 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x 27cc Piston Rebuild Kit Set (35mm)1 x 4x Complete Innovative Red Anodized Savage Shocks1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x M3x10 Button Head Socket cap screws - bag 101 x M6 Rod Ends & camber ball set1 x M4x10 Socket head cap screws - bag 101 x Steering Crank shaft1 x 4x Savage Steering post bearings - 6x10x3mm1 x Rear Chassis Plate 7075-T6 V3 - 874821 x HPI Baja Screw Kit (all models) - High tensile1 x Torx Screw Kit Elcon etc - High tensile Steel1 x M6 Rod Ends - Left hand thread1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x O-Ring Diff Cups - 5.5x2mm1 x M4 Captive Nuts / T Nuts - Bag102 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")2 x Losi 5ive-T 2.0 servo single arm V2.02 x 29cc Piston (36mm)1 x Outdrive cup shaft Orings1 x Rear Big Bore Shocks - Losi 5ive Blue1 x IRC Hing Pins Front Top V2 - 866331 x Losi 5ive Hing Pins A-Arms1 x Innovative-RC T-Shirt - Size Large1 x CY 29cc Piston ring - 36x1mm2 x Innovative-RC Hoodie - Size XXX Large2 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Thunder Tiger Differential Case MT4 G3 - Red1 x Losi 5T 5B Shock Towers V2 - Rear1 x M4x16 Socket head cap screws - bag 102 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Baja Rear Lower Brace 2 Blue - 874791 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V22 x Front Axel - Thunder Tiger MT4 CVD Universal2 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0302 x Flywheel Key2 x Diff/Bulkhead Housing Screw Set2 x Baja Upper Front Arm Brace Upper Red2 x Carburetor Set WT6682 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x 10x 3.5mm Body Clip - Rpin1 x Piston Roller Pin Bearing2 x Engine / Cylinder Cover2 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x HPI Baja Rear Brace 4mm - 874882 x Baja Front Lower Brace Blue - 874782 x 4x8x0.3 Steel Shim - Pack 102 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x HPI Baja wheel drive pin 4x281 x Servo Y Lead JR, Futaba, Hitec etc1 x CY stock crank set1 x 4mm flexable brake pipe1 x Clutch Shoe Holder Mount1 x 27cc (35mm) Cylinder Head 2 Bolt1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x Blue Big Bore shock Spring Retainers - Aluminium1 x Baja Shock Spring Retainer - LST1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Front - Antiroll Bar brace1 x Baja Bush Set - BLUE1 x Engine Clutch bottom spacer stock - 875711 x CY Exhaust Gasket1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x MT4 Chassi Gaskets - 6x1 x HPI Baja Rear Lower Brace Blue - 87480
Reviews
Shock Tower Brace - Black
Shock Tower Brace - Black
5.31€

Nice bit of kit, work well with stock shocks and towers too,...