Innovative-RC Pro Mid Tank mod Kit

35.42€

Product may vary slightly from image representation.
  • Model:071102-4
Available Options
Live Stock Check: 0 units
Share This Product

This Mid tank mod kis is for mounting of the HPI Hellfire 150cc, Muggen 150cc & Ofna 250cc fuel tanks. Please note that this kit only works with the Innovative-RC TVPs (Bash or race tvps).

Battery Box bracket
A options of battery box brackets is available for use with the kit, for mounting the Rush Evo or the firestorm box to the front (or rear) Shock towers (see below for option to include with this kit) All bracket types are CNC machined from 6082-T6 aluminium and included all fixing screws.

Front Stearing & Tank Support Bracket
This Bracket is used to hold the two stearing posts in postion and also to secure the fuel tank plate in place at the front. Made from 6082-T6 aluminium for high strength including all fixing hardware.

Rear Fuel tank plate support bracket
This Bracket is used to secure the fuel tank plate in place at the rear of the fuel tank plate. Made from 6082-T6 aluminium for high strength.

Rear Servo Mounts
Rear Servo Mount brackets for mounting the trottel servo to the rear of Innovative-RC TVPs. Made from high strength Acetal for low weight and high strength including all needed mounting screws.

Stearing / Reciver Box
Innovative-RC Stearing & Reciver specially designed box for the midtank mod for fixing to Innovative-RC TVPs.Made from high strength Acetal for low weight and high strength with a clear lid to the box. This box is used to mount the savage stearing servo in possion and reciver in location .
Please note the box size is as follows for the RX space
59mm Long
24mm Wide
27.3mm High

I-RC stearing Linkages
This linkage is for use with the Innovative-RC Midtank mod, the threaded rod contains a left hand and a right hand thread for quick easy adjustments with no need to take the linkage apart. The threaded rod is made from high grade high strength stainless steel for rust protection and long life.

Fuel Tank posts
A selection of different fuel tank posts are available for use with the Mid tank mod. see below for option of which post to have shipped with this kit.

Brake & throttle linkage rods
Only available with the pro kit version we include brake & throttle linkage rods that are pre-cut to length and pre Z Bent for connecting to the throttle bell crank and brake leaver (ofna slider kit will be needed).

Please note that the CEN and Mugen fuel tank combo only works with front extended TVPs, +6mm extended TVP set or the 1inch and 6mm TVP set.

Items Included:-
1x Battery box bracket HPI Firestorm or HPI Rush Evo
1x Front Stearing & Tank Support Bracket
1x Rear Fuel tank plate support bracket
2x Fuel tank mounts HPI Hellfire, Mugen or ofna fuel tanks (see options below)
1x set rear Servo Mounts
1x I-RC Stearing / Reciver Box
1x I-RC stearing Linkage
1x Set of Brake & throttle linkages
1x Set of fixing screws for mounting parts, Grade 12.9 For caphead screws, 10.9 countersunk and buttenhead screws.

Items Required:-
Allen Keys
Servo Exstention cables (300mm, 50mm)
Firestorm or rush evo battery box
ofna slider linkage kit (or similar product)
Fuel tank (ofna 260cc, hellfire 150cc or mugen 150cc)

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Big Bore Shock Body All Colours - Losi Front2 x HPI Baja Shorty Servo Mount Brace2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x IRC Front MID Front big bore springs - Losi 5T1 x CY Flywheel / Fan Cover1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Innovative-RC Hoodie - Size XXXX Large1 x Losi DBXL front & rear shock end ball1 x Baja Brake Kit - Full Set all Models1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x CVD inner Drive set Pins 5x20mm1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CY 4 Bolt Gasket set rebuild kit1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x CY Clutch case Housing1 x Brake pad screws - M4 Tower to IRC pads1 x Baja Front lower arm brace Red - 874811 x Carburetor Gasket1 x IRC ESC Box - MT41 x Innovative-RC Hoodie - Size Large1 x Baja Front Upper Brace Blue - 874811 x IRC Red UHD Front big bore springs1 x Innovative-RC T-Shirt - Size Medium1 x Losi 5ive Engine mount inserts - #201 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Baja Shock Top Mounts - Front1 x Diff/Bulkhead Housing - Rear Silver B25421 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x IRC Hing Pins Rear Hub V2 - 866361 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Thunder Tiger Front/Rear outdrive1 x Shock Bleed Screw - 4x1 x IRC RX Box Set - MT41 x Engine Clutch bottom spacer Black - 875711 x Losi 5ive Engine mount inserts - #181 x I-RC Losi Big Bore front shock Spring - 44lb1 x CY Replacement Crank Case Gasket1 x M3x8 Countersunk cap screws - bag 101 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x ProLux Light Weight rebuildable fuel filter - large1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x Losi 5ive top shock mounts1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x Front Heavy Duty losi Shock Shaft - 8mm1 x Shock Bush short1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x 10x16x0.1 Steel Shim - Pack 101 x Brake plate spacer RED - 874971 x M6 Rod Ends & camber + steering ball set1 x Rear Big Bore Shocks - Losi 5ive Red1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x Shock Tower Brace - Black1 x HoBao / Ofna 1/7th Fuel tank - 250cc1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Baja Front Upper Brace - 874811 x I-RC Baja Big Bore rear shock Spring - Stock1 x Front Big Bore Shocks - Losi 5ive Silver1 x Innovaitve-RC Shock Piston1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x 4 Bolt Cylinder Gasket1 x Short Big Bore Rod Ends - M81 x Right Clutch Spacer - 875551 x Left Spacer - 875711 x HPI BAja Left Side Engine Mount Brace RED - 874891 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x CY Kill Switch Inc rubber cover1 x Crankcase engine Seal set - Nitrile type1 x M3x3 Grub Set screw1 x Flywheel Nut1 x M4x16 Countersunk Socket head cap screws - bag 101 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x Piston Pin 23 & 26cc - 8x25mm1 x Battery box bracket HPI Rush box1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x CVD inner Drive set Pins 5x22mm1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x M3x16 Countersunk Socket head cap screws - bag 101 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x Innovative-RC TT MT4 trayless Kit - RED1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x CY 2 Bolt Gasket set rebuild kit1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x Rear Big Bore Shocks - Losi 5ive Black1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Center Tower top plate for truck V1.01 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x Innovative-RC Muggy Chassis - Silver1 x Dgobone Drive Pin Set 5x24mm1 x M8x20 Socket head cap screws - bag 61 x Roll Bar for HPI Savage 3mm1 x Ceter tower diff mounts Front & Rear1 x 3x Losi 8ight-T Diff Cup - Silver1 x M5x5 Grub Set Screw1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Innovative-RC Foam Filter Oil - 100ml1 x LipoBox - 4S1 x IRC Hing Pins Rear Top V2 - 866351 x Titanium Exhaust Wrap1 x Piston Pin 27 & 29cc - 8x281 x innovative-rc Losi 5ive Diff Cup / Case1 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x Crankcase engine Seal set - Viton type1 x HPI Baja wheel drive pin 5x24- 965041 x Front Big Bore Shocks - Losi 5ive Black1 x Ofna 250cc Fuel Tank Mounts1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Baja Diff bush - B0801 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Baja Diff Cup side screws1 x differential cross pins TT MT4 - 6x1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Engine / Cylinder Cover 4 Bolt1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x 6x Differential Gaskets1 x M3x35 Socket head cap screws - bag 101 x Big Bore Shock 3 Hole Piston1 x 3x Losi Muggy Diff Cup - Black1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Innovative-RC Carbon Fiber replacement Pads1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x CY Pull Start Assembly1 x 50x 6mm Body Clip Bulk - Rpin1 x LipoBox - 6S1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x CY Insulator manifold1 x Big Bore Shock 5 Hole Piston1 x IRC BLACK MID rear big bore springs - Losi 5T1 x M3 Captive Nuts / T Nuts - Bag101 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x LCG TVPs, Exstended 1inch back with 6mm Front1 x Shock Tower Brace - Silver1 x Baja Rear lower arm brace Red - 874801 x I-RC Flywheel Puller tool1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x Battery box bracket HPI Rush box - Savage X1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x CY 26cc Piston ring - 34x0.7mm1 x Losi 5ive drive cup Clips1 x M4 Nylock nut bag of 201 x Savage Shock Bottom End Cap1 x Baja Diff o-rings - bag101 x Losi 5T 5B Shock Towers - Front1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x Center Tower to Clutch suport brace V1.01 x Front Big Bore Shocks - Losi 5ive Blue1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Losi 5ive Engine mount inserts - #191 x HPI Baja Brake Calliper1 x DBXL Top shock cap Bush 5mm1 x Diff/Bulkhead Housing - Front Silver1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x Left Spacer Black - 875711 x Brake pad screws - IRC Center Tower to IRC Pads1 x Crank Case Engine Snap Ring1 x Innovative-RC Hoodie - Size Small1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x Engine Clutch bottom spacer RED - 875711 x 26cc (34mm) Cylinder Head - 4 Bolt1 x 8x Shock Standoffs - Standard Shocks1 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x 27cc Piston Rebuild Kit Set (35mm)1 x 4x Complete Innovative Red Anodized Savage Shocks1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x M3x10 Button Head Socket cap screws - bag 101 x M6 Rod Ends & camber ball set1 x M4x10 Socket head cap screws - bag 101 x Steering Crank shaft1 x 4x Savage Steering post bearings - 6x10x3mm1 x Rear Chassis Plate 7075-T6 V3 - 874821 x HPI Baja Screw Kit (all models) - High tensile1 x Torx Screw Kit Elcon etc - High tensile Steel1 x M6 Rod Ends - Left hand thread1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield
Reviews
Ultra Heavy Duty Drive Shaft - Savge X, RTR, SS - V2
Ultra Heavy Duty Drive Shaft - Savge X, RTR, SS - V2
23.62€

Just received Dog Bones for Savage Flux V2, very pleased wit...