UHD Inner HPI Baja 5SC size drive cup (2x) - 104965

£55.00

Product may vary slightly from image representation.
  • Model:104965
Live Stock Check: 5 units
Share This Product
V2022, upgraded new version fully enclosed design for the innovative-RC dog bones using 1/4" drive pins.

Set of 2x Replacement indder diff drive cups for the HPI baja to fit Innovative-RC UHD Drive line , note these only fit the Innovative-RC dog bones and not standard dog bones/shafts due to the new 1/4" pin size.
Made to the same size as the HPI baja 5SC cups but with enclosed slots for the drive pin with in the dog bone. so any boots that fit baja SC drive cups will still be compatable. Replaces HPI part#104965,

 

Made from British high tensile steel with a speshial coustom heat treatment profile for use on large CC egines, and ground finished for fitment with in the bearings leading to a better long life drive line.

is Drive boot compatable also (requres 5sc boots for best fit)
Direct replacement to standard parts.
new UHD version aimed with the big CC engines in mind. Comes with full Innovative-RC Life Time warranty as standard from breakage only and not wear.


Included:
2x out drive cups
2x 5x24 H&G Pins
2x M4x10 Socket cap screw

Lifetime warranty against breaking

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x Black Big Bore shock Spring Retainers - Aluminium1 x Rear Big Bore Shocks - Losi 5ive Black1 x IRC Red UHD Front big bore springs - Losi 5T1 x M6 Hank rivet bush - Bag101 x 10x 3.5mm Body Clip - Rpin2 x MCD Fork Ends set 4 - M61 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x IRC Front MID Front big bore springs - Losi 5T1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x M3x16 Countersunk Socket head cap screws - bag 101 x I-RC stearing Linkages1 x Baja Upper Front Arm Brace Upper Blue2 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x FILTERED FUEL PICK UP CLUNK1 x M3 Nylock nut bag of 201 x M3x16 Socket head cap screws - bag 101 x Losi 5ive Engine mount inserts - #202 x Losi Titanium Grade 5 King Pins B20741 x Rear Fuel tank plate support bracket1 x M3x10 Socket head cap screws - bag 101 x Innovative-RC Big Bore Shock Socks - Blue1 x M2.5x12 Stainles Socket Cap Screw - Bag 101 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x M3x10 Countersunk Socket head cap screws - bag 101 x Losi 5T 5B Shock Towers - Front1 x M2.5 Nylock Nuts - Bag 101 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x HPI Baja Front Upper Plate 4mm RED - 874841 x Brake pad screws - IRC Center Tower to stock Pads1 x 4mm flexable brake pipe1 x Futaba type sliding charing switch1 x M3x10 Button Head Socket cap screws - bag 101 x IRC Red UHD rear big bore springs - Losi 5T1 x M2 Captive Nuts / T Nuts - Bag 101 x Losi 5T 5B Shock Towers V2 - Rear1 x M3x12 Countersunk Socket head cap screws - bag 101 x M3 Spring Washer Zinc plated - bag 201 x M3x12 Socket head cap screws - bag 101 x M3 Captive Nuts / T Nuts - Bag101 x Black Anodized Roll Bar1 x CY Exhaust Gasket1 x FILTERED FUEL PICK UP CLUNK Brass1 x M3 washers - Zinc plated bag 201 x Innovative-RC Hoodie - Size X Large1 x 6x Differential Gaskets1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x Losi 5T 5B Shock Towers Bash - Front BLUE1 x Ceter tower diff mounts Front & Rear1 x Innovative-RC Hoodie - Size XXX Large1 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Shock Tower Brace - Silver1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x Innovative-RC Hoodie - Size Large1 x UHD Innovative-RC BAJA dogbones Exstended- 1049662 x Clutch Shoe Holder Mount1 x Crankcase engine Seal set - Viton type1 x Brake pad screws - 5B Tower to IRC pads1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x HPI Baja Brake Calliper1 x M6 Rod Ends & camber + steering ball set1 x Losi 5ive drive cup Clips1 x CY +2mm Stroker Crank set1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Baja Shock spring retainer - Heavy Duty Springs1 x center tower brake cam set1 x M4x4 Grub Screws1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x M6 Rod Ends & camber ball set1 x I-RC Losi Big Bore front shock Spring - 26.5lb1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x F270 4Bolt With Filter, Pullstart & Carb2 x Losi 5T 5B Shock Towers Bash - Rear BLUE1 x SuperSwitchHD - 1x1 x Thunder Tiger Front/Rear outdrive1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Diff/Bulkhead Housing - Rear Silver B25421 x MCD Fork Ends set 4 - M51 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x I-RC Losi Big Bore rear shock Spring - 66lb1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x M6 Rod Ends - Left hand thread1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Innovative-RC Hoodie - Size XX Large1 x IRC Hing Pins Rear Bottom V2 - 866351 x 6x Screw Shaft M4x2x12mm
Reviews
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
£70.00

Brought this to convert my original savage XL to a low centr...