Diff/Bulkhead Housing - Rear Silver B2542

£170.00

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CY Flywheel / Fan Cover1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Innovative-RC Hoodie - Size XXXX Large1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x CY 4 Bolt Gasket set rebuild kit1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CVD inner Drive set Pins 5x20mm1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x Baja Brake Kit - Full Set all Models1 x CY Clutch case Housing1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x Front - Antiroll Bar brace1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Baja Bush Set - BLUE1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Engine Clutch bottom spacer stock - 875711 x HPI Baja Rear Brace RED 4mm - 874881 x CY Exhaust Gasket1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Losi 5ive-T 2.0 servo single arm V2.01 x 1x Savage Diff Cup Case1 x 29cc Piston (36mm)1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x M6 washers - Zinc plated bag 201 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x IRC ESC Box - MT41 x HPI Baja Rear Lower Brace Blue - 874801 x Innovative-RC Hoodie - Size Large1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x Outdrive cup shaft Orings1 x IRC Hing Pins Front Top V2 - 866331 x Baja Front lower arm brace Red - 874811 x Losi 5ive Hing Pins A-Arms1 x I-RC Losi Big Bore rear shock Spring - 44lb1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x Rear Big Bore Shocks - Losi 5ive Blue1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Baja Front Upper Brace Blue - 874811 x Losi 5T 5B Shock Towers V2 - Rear1 x M4x16 Socket head cap screws - bag 101 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x IRC Red UHD Front big bore springs1 x Innovative-RC Hoodie - Size XXX Large1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x Shock Bleed Screw - 4x1 x Innovative-RC T-Shirt - Size Large1 x Losi 5ive Engine mount inserts - #201 x Thunder Tiger Front/Rear outdrive1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Baja Rear Lower Brace 2 Blue - 874791 x Baja Upper Front Arm Brace Upper Red1 x M3x8 Countersunk cap screws - bag 101 x Front Axel - Thunder Tiger MT4 CVD Universal1 x Diff/Bulkhead Housing - Rear Silver B25421 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Shock Cap O-Ring Spacers1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x IRC RX Box Set - MT41 x Servo Y Lead JR, Futaba, Hitec etc1 x I-RC Losi Big Bore front shock Spring - 44lb1 x 4mm flexable brake pipe1 x 27cc (35mm) Cylinder Head 2 Bolt1 x Innovative-RC T-Shirt - Size Medium1 x Diff/Bulkhead Housing Screw Set1 x CY stock crank set1 x Piston Roller Pin Bearing1 x Blue Big Bore shock Spring Retainers - Aluminium1 x 4mm Nylon brake pipe1 x Baja Front Lower Brace Blue - 874781 x 4x8x0.3 Steel Shim - Pack 101 x Engine / Cylinder Cover1 x Turnbuckle / Tie-Rod relocation bracket1 x CRT Chassis Gaskets1 x 10x 3.5mm Body Clip - Rpin1 x differential cross pins TT MT4 - 2x1 x Shock Bush short1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x Rear Big Bore Shocks - Losi 5ive Silver1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Clutch Shoe Holder Mount1 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x M4x30 Socket head cap screws - bag 101 x Short Big Bore Rod Ends - M81 x Front Heavy Duty losi Shock Shaft - 8mm1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x I-RC Baja Big Bore rear shock Spring - Stock1 x Baja Bush Set - Black1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Losi Titanium Grade 5 King Pins B20741 x Spur Gear Spacer RED - 866161 x Wheel Spacer Adapters - GRP & MCD Wheels1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x Carb & Exhaust screws - 154821 x 10x16x0.5 Steel Shim - Pack 101 x 26cc piston (34mm)1 x Skid Plate for Exstended 1inch back, 6mm Front TVPs1 x M4x16 Countersunk Socket head cap screws - bag 101 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x Crankcase engine Seal set - Nitrile type1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x losi 5ive diff inserts1 x Flywheel Nut1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x Engine Clutch bottom spacer Black - 875711 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x Smart-Fly - Pin & Flag1 x IRC Black HD Rear Big Bore Springs1 x Shock Tower Brace - Black1 x SuperSwitchHD - 1x1 x Center Tower top plate for truck V2.01 x Innovaitve-RC Shock Piston1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Piston Pin 23 & 26cc - 8x25mm1 x Ofna 250cc Fuel Tank Mounts1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Crankcase engine Seal set - Viton type1 x Battery box bracket HPI Rush box1 x Center Tower top plate for truck V1.01 x Front Big Bore Shocks - Losi 5ive Blue1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x M3x35 Socket head cap screws - bag 101 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x 6x Differential Gaskets1 x Savage Shock Bottom End Cap1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x M4 Nylock nut bag of 201 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Baja Diff Cup side screws1 x Baja Diff bush - B0801 x Losi 5ive drive cup Clips1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x 4x Complete Innovative Red Anodized Savage Shocks1 x M8x20 Socket head cap screws - bag 61 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Right Clutch Spacer - 875551 x differential cross pins TT MT4 - 6x1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Left Spacer Black - 875711 x CY 26cc Piston ring - 34x0.7mm1 x DBXL Top shock cap Bush 5mm1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Torx Screw Kit Elcon etc - High tensile Steel1 x Steering Crank shaft1 x innovative-rc Losi 5ive Diff Cup / Case1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x Air Filter Gasket1 x M3 washers - Zinc plated bag 201 x M3x5 Button Head Socket cap screws - bag 101 x Big Bore Shock 3 Hole Piston1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x CY Pull Start Assembly1 x 1x Losi Muggy Diff Cup - Silver1 x Brake pad screws - IRC Center Tower to stock Pads1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x Engine Clutch bottom spacer RED - 875711 x 1x Losi 8ight-T Diff Cup - Black1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x NGK Spark Plug CMR5H1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x Innovative-RC Carbon Fiber replacement Pads1 x Losi DBXL front & rear shock end ball1 x M4 Washer Zinc plated bag 201 x center tower brake cam set1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x Baja Rear lower arm brace Red - 874801 x Rear Chassis Plate 7075-T6 V3 - 874821 x Piston Pin Washer Set1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x M5 Captive Nuts / T Nuts - Bag101 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x HPI Baja stearing servo adapter mount1 x MCD Fork Ends set 4 - 8mm1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x CY 23cc Piston Ring - 32x1mm1 x Losi Steel King Pins B20741 x Baja Upper Front Arm Brace Upper Blue1 x CRT Tower Set - Silver1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x M3x25mm Socket Cap Screw - BAG 10
Reviews
CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B3224
CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B3224
£45.00

have had a set on the front of my 5iveT for a good while now...