4x Complete Innovative Red Anodized Savage Shocks

141.69€

Product may vary slightly from image representation.
  • Model:Sav-BB-RED
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
     
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Grabbed a set of these for my CEN Reeper after seeing someone on YouTube run them. Build quality is superb. Not too many options out there for the Reeper so I was happy everything went together well. All included hardware was solid and they mounted up easily. (I had to drill the mounts to fit the stock Reeper upper mounting screw size) The only thing I found difficult was the lower shock cup doesn't have a slot to fit around the piston so I had to fill and bleed with the spring on but it worked.

Rated by John
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Innovative-RC Hoodie - Size XXXX Large1 x CY Flywheel / Fan Cover1 x Losi DBXL front & rear shock end ball1 x Baja Shock Spring Retainer - LST1 x Baja Brake Kit - Full Set all Models1 x CY Clutch case Housing1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x 29cc Piston (36mm)1 x Losi 5ive-T 2.0 servo single arm V2.01 x 24mm Wheel Nuts - GRP & MCD Wheels1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x HPI Baja Rear Lower Brace Blue - 874801 x 1x Savage Diff Cup Case1 x MT4 Chassi Gaskets - 6x1 x Innovative-RC Hoodie - Size Large1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x IRC ESC Box - MT41 x HPI Baja Rear Brace RED 4mm - 874881 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x Baja Shock Top Mounts - Front1 x Baja Front Upper Brace Blue - 874812 x Baja Front lower arm brace Red - 874811 x Spur Gear Spacer - 866161 x Thunder Tiger Differential Case MT4 G3 - Red1 x M4x16 Socket head cap screws - bag 101 x Innovative-RC T-Shirt - Size Large2 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Diff/Bulkhead Housing - Rear Silver B25421 x Baja Rear Lower Brace 2 Blue - 874791 x Shock Bleed Screw - 4x1 x I-RC Losi Big Bore front shock Spring - 44lb1 x Losi 5ive Engine mount inserts - #181 x Thunder Tiger Front/Rear outdrive1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x Diff/Bulkhead Housing Screw Set2 x Baja Upper Front Arm Brace Upper Red2 x IRC RX Box Set - MT42 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x Flywheel Key2 x Innovative-RC T-Shirt - Size Medium2 x CY Replacement Crank Case Gasket2 x Piston Roller Pin Bearing2 x M3x8 Countersunk cap screws - bag 102 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm2 x 4x8x0.3 Steel Shim - Pack 102 x CY 29cc Piston ring - 36x1mm2 x Carburetor Set WT6682 x 10x 3.5mm Body Clip - Rpin2 x Losi 5ive Hing Pins A-Arms2 x HPI Baja Rear Brace 4mm - 874882 x Engine / Cylinder Cover2 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x Losi 5ive top shock mounts2 x Rear Big Bore Shocks - Losi 5ive Silver2 x Blue Big Bore shock Spring Retainers - Aluminium2 x CY stock crank set2 x Losi 5T 5B Shock Towers V2 - Rear2 x HPI Baja wheel drive pin 4x282 x 26cc piston (34mm)2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm2 x Servo Y Lead JR, Futaba, Hitec etc2 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm2 x HoBao / Ofna 1/7th Fuel tank - 250cc2 x IRC Hing Pins Rear Hub V2 - 866362 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874902 x CRT Chassis Gaskets2 x 4mm Nylon brake pipe2 x 27cc (35mm) Cylinder Head 2 Bolt2 x Spur Gear Spacer RED - 866162 x losi 5ive diff inserts2 x 4mm flexable brake pipe2 x 3x Thunder Tiger Differential Case MT4 G3 Black2 x Ultra Heavy Duty Front Center Dogbone - 78mm2 x CY Pull Start Assembly - Metal grab2 x Mugen Fuel Tank Mounts2 x Front Heavy Duty losi Shock Shaft - 8mm2 x Baja Front Lower Brace Blue - 874782 x 1x Losi Muggy Diff Cup - Black2 x Front Thunder Tiger MT4 CVD Universal drive shaft set2 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite2 x I-RC Losi Big Bore rear shock Spring - 66lb2 x HPI Baja Rear Brace 4mm Black Anodized - 874882 x 10x16x0.5 Steel Shim - Pack 102 x I-RC Baja Big Bore rear shock Spring - Stock2 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0942 x M4x30 Socket head cap screws - bag 102 x Engine Clutch bottom spacer Black - 875712 x Clutch Shoe Holder Mount2 x M6 Rod Ends & camber + steering ball set2 x Shock Bush short2 x M4x16 Countersunk Socket head cap screws - bag 102 x Rear Big Bore Shocks - Losi 5ive Red2 x Front Big Bore Shocks - Losi 5ive Silver2 x Left Spacer - 875712 x Innovative-RC TT MT4 trayless Kit - RED2 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 52 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver2 x Losi Titanium Grade 5 King Pins B20742 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874892 x 4x Complete Innovative Black Anodized Savage Shocks2 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc2 x ProLux Light Weight rebuildable fuel filter - large2 x Crankcase engine Seal set - Nitrile type2 x Skid Plate for Exstended 1inch back, 6mm Front TVPs2 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm2 x Losi 5T 5B Shock Towers Bash - Rear SILVER2 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3212 x Baja Bush Set - Black1 x Carb & Exhaust screws - 154821 x O-Ring Diff Cups - 9.5mmx2.5mm1 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x2 x Diff/Bulkhead Housing Bearings - 15x28x7mm2 x CY Kill Switch Inc rubber cover1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x CY 2 Bolt Gasket set rebuild kit2 x M3x3 Grub Set screw1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x Left Spacer RED- 875711 x Rear Big Bore Shocks - Losi 5ive Black1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x Piston Pin 27 & 29cc - 8x281 x Baja Diff gear Drive pin - 965011 x Rear Axel - Thunder Tiger MT4 CVD Universal1 x Titanium Exhaust Wrap1 x Dgobone Drive Pin Set 5x24mm1 x Roll Bar for HPI Savage 3mm1 x IRC Black HD Rear Big Bore Springs1 x Flywheel Nut1 x M5x5 Grub Set Screw1 x 4 Bolt Cylinder Gasket1 x IRC Hing Pins Rear Top V2 - 866351 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x Innovative-RC Muggy Chassis - Silver1 x Center Tower top plate for truck V2.01 x Ceter tower diff mounts Front & Rear1 x Hellfire Fuel Tank Mounts1 x Brake plate spacer RED - 874971 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x M4 Captive Nuts / T Nuts - Bag101 x Innovative-RC Foam Filter Oil - 100ml1 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049651 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x 3x Losi Muggy Diff Cup - Black1 x 2x Flanged 10x6x3mm2 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CVD inner Drive set Pins 5x20mm1 x CY 4 Bolt Gasket set rebuild kit1 x Brake pad screws - M4 Tower to IRC pads1 x Front - Antiroll Bar brace2 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x Rear Heavy Duty losi Shock Shaft - 8mm2 x Baja Bush Set - BLUE2 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x Carburetor Gasket1 x 10x16x0.1 Steel Shim - Pack 101 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC
Reviews
CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B3224
CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B3224
53.13€

have had a set on the front of my 5iveT for a good while now...