4x Complete Innovative Black Anodized Savage Shocks

141.69€

Product may vary slightly from image representation.
  • Model:Sav-BSHOCkV2
Live Stock Check: 2 units
Share This Product

These shocks are V2 and contain parts from our new 1/5th Baja Big Bore Shocks fully made by Innovative-RC.
These shocks are fully designed to be used with Innovative-RC LST Shock mounting kit for mounting the shocks onto the HPI savage (all Models).

Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface finish as fine as 2 micro-inches (0.05 micrometers) translating to giving a silky smooth operation over the entire shock travel distance.

Starting with a large oversized shock body of 20mm giving a huge volume of oil followed by a 8mm high tensile steel shaft that is precision ground round for a perfect seal in all conditions as opposed to 4mm (RTR) these shocks are a big bore shock just like the LST1/LST2 shocks and contain an oil bleed hole located in the shock cap to allow for easy assembly and getting every last bit of air out of the shock when fully assembled.

No large shock shaft would be complete with out a full Umbrella / Oil seals to give the best possible oil seal, making leaks a thing of the past. we have also built other seals into the shock bottom cap to limit any dirt & sand entering into the shock seals from harsh environments meaning no expensive seal upgrades are needed.

The shock body contains a fully adjustable spring retaining ring for full adjustment of the shock spring to fine tune shock setup to any drivers needs and requirements when out bashing or racing on & off road.

All parts are made from high grade derlin while alll aluminium parts are made from high grade 6082-T6 and anodized to a hard durable finish.
Shock Shafts are a massive 8mm thick & made from high grade steel for long life when bashing.
Shocks are available in a black, clear/Silver & Blue anodized finish.

These shocks come fully complete and just need oil adding, we recommend an oil of around 35 ~ 40wt but this is down to the customers needs and area of use etc.

.:Over View:

  • Massive 8mm front shock shaft - ground round for a perfect sea - Surface finish: Better than 0.6 microns (25 micro inch)
  • Shock bodys also now have a ultra fine burnished mirror-like finish giving a tough,work-hardened surface
  • 4x Savage Big Bore shocks - pre assembled.

  • 4x Bottom rose joint balls for mounting.

  • Pre install Umbrella/Oil seals for leak free and long life shock operation.

  • Extra seal protection before oil/umbrella seal to stop sand and find dirt entering seals.

.:Needed & recommended Parts:.

  • Shock Oil - 57ml (2oz) ~ fills two and half shocks.

  • Shock Mounting kit for LST Shocks (depending on savage models)

  • Coustom Shock Socks available from us & groovy_gaiters

  • Aprox 140grams each
    33mm OD spring
    ~160mm Eye to Eye (center to center) Mount

.:Oil recommended:.
We find we do get asked this question quite often, please use the bellow as a guide line only, as we can not know your driving style and likes but we find it helps most people get started on there way to a set-up they like, also custom pistons can help in shock rebound rates (see shock parts for blank pistons and other piston types)

Silicone shock oil, recommend, 20-35wt front, 25-45wt rear. (~200CPS - 400CPS front, 280CPS - 650 CPS rear),

 

any questions please contact us.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm1 x IRC Front MID Front big bore springs - Losi 5T1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x 10x16x0.1 Steel Shim - Pack 101 x CY Clutch case Housing1 x Baja Brake Kit - Full Set all Models1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CY Exhaust Gasket1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x HPI Baja Rear Lower Brace Blue - 874801 x 29cc Piston (36mm)1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x 1x Savage Diff Cup Case1 x IRC ESC Box - MT41 x HPI Baja Rear Brace RED 4mm - 874881 x MT4 Chassi Gaskets - 6x1 x Baja Front lower arm brace Red - 874811 x Spur Gear Spacer - 866161 x CVD Pin rebuild kit - B32171 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x I-RC Losi Big Bore rear shock Spring - 44lb1 x 5x 2.5x14mm CVD Dowel Pins1 x M6 washers - Zinc plated bag 201 x Innovative-RC Hoodie - Size XXX Large1 x Rear Big Bore Shocks - Losi 5ive Blue1 x IRC Red UHD Front big bore springs1 x Baja Front Upper Brace Blue - 874811 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x IRC Hing Pins Front Top V2 - 866331 x Outdrive cup shaft Orings1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x M4x16 Socket head cap screws - bag 101 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Losi 5ive Engine mount inserts - #201 x Innovative-RC T-Shirt - Size Large1 x Baja Shock Top Mounts - Front1 x Losi 5ive Hing Pins A-Arms1 x Thunder Tiger Differential Case MT4 G3 - Red1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Diff/Bulkhead Housing - Rear Silver B25421 x Baja Rear Lower Brace 2 Blue - 874791 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Shock Cap O-Ring Spacers1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Thunder Tiger Front/Rear outdrive1 x Losi 5ive Engine mount inserts - #181 x IRC RX Box Set - MT41 x Diff/Bulkhead Housing Screw Set1 x Shock Bleed Screw - 4x1 x I-RC Losi Big Bore front shock Spring - 44lb1 x Baja Upper Front Arm Brace Upper Red1 x Flywheel Key1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x CY Replacement Crank Case Gasket1 x IRC Hing Pins Rear Hub V2 - 866361 x Piston Roller Pin Bearing1 x Carburetor Set WT6681 x M3x8 Countersunk cap screws - bag 101 x 10x 3.5mm Body Clip - Rpin1 x CY 29cc Piston ring - 36x1mm1 x Innovative-RC T-Shirt - Size Medium1 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI Baja Rear Brace 4mm - 874881 x Rear Big Bore Shocks - Losi 5ive Silver1 x Engine / Cylinder Cover1 x CY stock crank set1 x Baja Front Lower Brace Blue - 874781 x Losi 5ive top shock mounts1 x Losi 5T 5B Shock Towers V2 - Rear1 x Servo Y Lead JR, Futaba, Hitec etc1 x Blue Big Bore shock Spring Retainers - Aluminium1 x 27cc (35mm) Cylinder Head 2 Bolt1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x HPI Baja wheel drive pin 4x281 x 4mm flexable brake pipe1 x Turnbuckle / Tie-Rod relocation bracket1 x 26cc piston (34mm)1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Clutch Shoe Holder Mount1 x Spur Gear Spacer RED - 866161 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x 4mm Nylon brake pipe1 x losi 5ive diff inserts1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Front Heavy Duty losi Shock Shaft - 8mm
Reviews
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
82.65€

Brought this to convert my original savage XL to a low centr...