23mm Heavy Duty wheel hex - Complete Set (4x) BLACK

£24.00

Product may vary slightly from image representation.
  • Model:23hex-blk
Live Stock Check: 0 units
Share This Product

23mm Heavy Duty Wheel Hex - Complete Set for HPI savage (4x) BLACK Anodized

23mm wheel hex adapters for the HPI Savage finished in a hard wearing durable clear anodized finish. These wheel hexes are designed to fit the HPI 17mm AXLE 8x15x42mm (Part number:# 86393, or CVD version # 87229). This is to over come the common problem of braking and snapping the standard type of axles when used in exstream bashing situations.

These wheel hexes have a 23mm hex on the back to fit with in the 23mm wheel rims with a 22mm front locking nut so no special spanner is required when using these wheel hexes, a 22mm socket or a 7/8" socket (not supplied, but can be brought from any good DIY shop for cheap!) can be used to tighten these hexes up.
These wheel hexes also come in left hand and right hand threaded types just like the standard savage wheel lock nuts. This is to insure that the wheel nuts are always kept fully tightened while in use keeping your wheels firmly in place at all times!!
While also a pin is inserted with in the wheel hex with a locking grub screw with in the wheel hex area to hold the hex onto the truck, so no 2nd nut is relayed upon when fixing these wheel hexes to the truck along with no loctite as the grub screw can never come out while the wheel is in place, unlike other common after market wheel hexes!

Will fit 40 series and standard 23mm hex size wheels.

Included:
4x 23mm Wheel hex,(2x Left hand & 2x right hand wheel hexes).
4x 22mm Nuts, (2x Left hand & 2x right hand nuts).
4x 3x16mm Hardened Dowel pins.
4x M4x4mm Grub Screws.

Required parts:
HPI 17mm AXLE 8x15x42mm (Part number:# 86393, or CVD version # 87229)

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Front Big Bore Shocks - Losi 5ive Silver1 x Innovative-RC Hoodie - Size Small1 x 2 Bolt heavy duty Cylinder Gasket1 x MCD & Savage Shock Spring -2.7mm1 x 50x 3.5mm Body Clip Bulk - Rpin1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x Rear Big Bore Shocks - Losi 5ive Red1 x MCD Fork Ends set 4 - M51 x Shock Cap O-Ring Spacers1 x M3 Nylock nut bag of 201 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0302 x 10x 3.5mm Body Clip - Rpin1 x HPI Baja Right Side Engine Mount Brace - 874901 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x O-Ring Diff Cups - 5.5x2mm1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Innovative-RC Hoodie - Size XXX Large1 x Innovative-RC Big Bore Shock Socks - Purple1 x HPI MT2 Diff Cup Case Silver - 1x2 x 4mm Nylon brake pipe1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x 4mm flexable brake pipe1 x Thunder Tiger Differential Case MT4 G3 - Red1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x CVD Pin rebuild kit - B32171 x Air Filter Gasket1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Failsafe-switch and small slide switch1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x Torx Screw Kit Elcon etc - High tensile Steel2 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Titanium Exhaust Wrap1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Innovative-RC Foam Filter Oil - 100ml1 x F230 4Bolt With Filter, Pullstart & Carb1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x HPI MT2 Diff Cup Case Silver - 2x1 x 10x16x0.3 Steel Shim - Pack 101 x Crankcase engine Seal set - Viton type1 x 10x16x0.5 Steel Shim - Pack 101 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi
Reviews
Skid Plate for Exstended 1inch back, 6mm Front TVPs
Skid Plate for Exstended 1inch back, 6mm Front TVPs
£12.00

got this last week and fits perfect and holds all the tvps n...