Flux Black Anodized +6mm Front LCG TVP Kit

$68.22

Product may vary slightly from image representation.
  • Model:Flux-6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 6mm Extended Front over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right): 260grams
Skid Plate & Braces:95grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x 2x 5mm Thick Top Mount Brackets - Savage X1 x Losi 5ive Engine mount inserts - #191 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Titanium Exhaust Wrap1 x Crankcase engine Seal set - Viton type1 x HPI MT2 Diff Cup Case Silver - 1x1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x IRC Red UHD rear big bore springs2 x M6 Hank rivet bush - Bag102 x O-Ring Diff Cups - 9.5mmx2.5mm1 x I-RC Losi Big Bore front shock Spring - 44lb1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x 2x Savage Diff Cup Case1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x CVD inner Drive set Pins 5x20mm1 x Servo Y Lead JR, Futaba, Hitec etc1 x 50x 3.5mm Body Clip Bulk - Rpin1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x M3 washers - Zinc plated bag 202 x IRC Hing Pins Full Set V2 - 10Pins1 x Silkolene - Foam Filter Oil 1L1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Spur Gear Spacer RED - 866161 x NGK Spark Plug CMR7H1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile2 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 1000mm (1M) Heavy Duty Servo Lead JR, Futaba, Hitec2 x 50x 6mm Body Clip Bulk - Rpin1 x HPI Baja Screw Kit (all models) - High tensile1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x HPI MT2 Diff Cup Case Black - 1x1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x ProLux Light Weight rebuildable fuel filter - large1 x G290RC Petrol RC Engine - 2 Stroke1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x 2x Top shock support brackets - Savage x1 x M3x10 Socket head cap screws - bag 101 x M3 Spring Washer Zinc plated - bag 201 x Piston Snap Ring Set1 x 10x16x0.3 Steel Shim - Pack 101 x M4x12 Countersunk Socket head cap screws - bag 102 x M5x5 Grub Set Screw1 x Torx Screw Kit Elcon etc - High tensile Steel1 x M2.5 Nylock Nuts - Bag 101 x M3 Captive Nuts / T Nuts - Bag103 x Out Drive Cup Pins - Bag 61 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x 4x8x0.3 Steel Shim - Pack 101 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x 6x Differential Gaskets1 x 26cc piston (34mm) - For 0.7mm Ring1 x M2 Captive Nuts / T Nuts - Bag 102 x Baja Big Bore Shock O-Ring Kit1 x Diff/Bulkhead Housing - Rear Silver B25421 x Rear Heavy Duty losi Shock Shaft - 8mm1 x M3x12 Countersunk Socket head cap screws - bag 101 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt1 x 2x Flanged Bearing - 10x6x4 3speed1 x M6 Rod Ends - Left hand thread1 x M4 Washer Zinc plated bag 201 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x DBXL Top shock cap Bush 5mm1 x 5x 2.5x14mm CVD Dowel Pins1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32162 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x Front Heavy Duty losi Shock Shaft - 8mm1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Big Bore Shock 4 Hole Piston1 x M5 Captive Nuts / T Nuts - Bag101 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Big Bore shock Spanner2 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x 4-40x3/8 Button Head socket Screw - Bag 101 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x Piston Roller Pin Bearing1 x Baja Shock spring retainer - Heavy Duty Springs2 x M4 Nylock nut bag of 201 x M5 washers - Zinc plated bag 201 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x High response clutch set - Yellow Spring1 x 2x 3mm Top Mount Brackets1 x HPI Baja wheel drive pin 5x24- 965041 x M3x16 Countersunk Socket head cap screws - bag 101 x Center Tower bearing set1 x G270RC Petrol RC Engine - 2 Stroke1 x MCD & Savage Shock Spring -2.7mm1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x High response clutch set - Red Spring1 x M4x4 Grub/Set Screw1 x CVD Drive set Pins 4x20mm B65601 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x 26cc piston (34mm)1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x 5x10x0.3 Steel Shim - Pack 101 x MCD & Savage Shock Spring -3mm1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x M5 Hank rivet bush - Bag10
Reviews
Shock Tower Brace - Black
Shock Tower Brace - Black
$5.58

Nice bit of kit, work well with stock shocks and towers too,...