Diff/Bulkhead Housing - Rear Silver B2542

198.74€

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x HPI MT2 Diff Cup Case Silver - 1x1 x 10x 3.5mm Body Clip - Rpin1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x HPI MT2 Diff Cup Case Black - 1x2 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Center Tower to Clutch suport brace V2.02 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x differential cross pins TT MT4 - 2x1 x Baja Brake Kit - Full Set all Models1 x Losi 5ive-T 2.0 servo single arm V2.01 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm2 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x Innovative-RC Big Bore Shock Socks - Purple1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Center Tower to Clutch suport brace V1.01 x M3x3 Grub Set screw1 x Thunder Tiger centre diff out drive1 x M6 Hank rivet bush - Bag101 x Big Bore Shock Body All Colours - Losi Front2 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x CVD inner Drive set Pins 5x22mm1 x M5 Hank rivet bush - Bag101 x IRC Front MID Front big bore springs - Losi 5T1 x UHD Outdrive Rear HPI Baja 5SC size (2x) - 1049671 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 50x 3.5mm Body Clip Bulk - Rpin1 x 2x Top shock support brackets - Savage x1 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x Thunder Tiger Front/Rear outdrive1 x 2x 3mm Top Mount Brackets1 x 6x Differential Gaskets1 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x Front Big Bore Shocks - Losi 5ive Silver1 x IRC Red UHD rear big bore springs1 x HPI MT2 Diff Cup Case Silver - 2x1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Front Heavy Duty losi Shock Shaft - 8mm1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x IRC Red UHD Front big bore springs - Losi 5T
Reviews
4x Complete Innovative Red Anodized Savage Shocks
4x Complete Innovative Red Anodized Savage Shocks
140.29€

Grabbed a set of these for my CEN Reeper after seeing someon...