Diff/Bulkhead Housing - Rear Silver B2542

£170.00

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x M3x12 Countersunk Socket head cap screws - bag 101 x HPI Hellfire Fuel tank - 150cc1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x Center Tower to Clutch suport brace V1.01 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x CRT Tower Set - Nickel2 x O-Ring Diff Cups - 5.5x2mm1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Out Drive Cup Pins - Bag 61 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M3 x 10x16x0.5 Steel Shim - Pack 101 x 23cc piston (32mm)2 x 6x Differential Gaskets2 x HPI MT2 Diff Cup Case Silver - 1x2 x 50x 6mm Body Clip Bulk - Rpin1 x MCD & Savage Shock Spring -2.7mm1 x Holts Brake Cleaner1 x I-RC Flywheel Puller tool1 x Center Tower to Clutch suport brace V2.01 x differential cross pins TT MT4 - 6x1 x M5 washers - Zinc plated bag 201 x 5x10x0.3 Steel Shim - Pack 101 x Motorex Air Filter Oil - spray1 x 4x8x0.3 Steel Shim - Pack 101 x 1x Losi LST1 & LST2 Diff Cup - Black1 x Baja Shock Top Mounts - Rear1 x HPI MT2 Diff Cup Case Black - 1x1 x M2.5 Nylock Nuts - Bag 102 x Big Bore Shock 3 Hole Piston1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x M4 Spring Washer Zinc plated - bag 201 x Innovative-RC Hoodie - Size Small1 x M3 washers - Zinc plated bag 201 x F230 4Bolt With Filter, Pullstart & Carb1 x Smart-Fly - Pin & Flag1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 3x Thunder Tiger Differential Case MT4 G3 Red1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Losi 5ive Spring Retainers1 x Dgobone Drive Pin Set 5x24mm1 x 2x 9x24x7mm Ball Bearing Rubber Shield1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Silkolene - Foam Filter Oil 1L1 x Innovative-RC Mug1 x Nitro Engine Piston Stopper1 x Losi 5ive drive cup Clips1 x M5 Hank rivet bush - Bag10
Reviews
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
£45.00

love these shafts they look and feel so sturdy have had no t...